View ATF-36163_39730.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1.5 - 18 GHz Surface Mount Pseudomorphic HEMT Technical Data
ATF-36163
Features
* Low Minimum Noise Figure: 1 dB Typical at 12 GHz 0.6 dB Typical at 4 GHz * Associated Gain: 9.4 dB Typical at 12 GHz 15.8 dB Typical at 4 GHz * Maximum Available Gain: 11 dB Typical at 12 GHz 17 dB Typical at 4 GHz * Low Cost Surface Mount Small Plastic Package * Tape-and-Reel Packaging Option Available
Surface Mount Package
SOT-363 (SC-70)
Pin Connections and Package Marking
SOURCE DRAIN
SOURCE
SOURCE SOURCE
Applications
* 12 GHz DBS Downconverters * 4 GHz TVRO Downconverters * S or L Band Low Noise Amplifiers
GATE
Note: Package marking provides orientation and identification.
Description
The Hewlett-Packard ATF-36163 is a low-noise Pseudomorphic High Electron Mobility Transistor (PHEMT), in the SOT-363 (SC-70) package. When optimally matched for minimum noise figure, it will provide a noise figure of 1 dB at 12 GHz and 0.6 dB at 4 GHz.
Additionally, the ATF-36163 has low noise-resistance, which reduces the sensitivity of noise performance to variations in input impedance match. This feature makes the design of broad band low noise amplifiers much easier. The performance of the ATF-36163 makes this device the ideal choice for use in the 2nd or 3rd stage of low noise cascades. The repeatable performance and consistency make it appropriate for use in Ku-band Direct Broadcast Satellite (DBS) TV systems, C-band TV Receive Only (TVRO) LNAs, Multichannel Multipoint Distribution Systems (MMDS), X-band Radar detector and other low noise amplifiers operating in the 1.5 - 18 GHz frequency range. This GaAs PHEMT device has a nominal 0.2 micron gate length with a total gate periphery (width) of 200 microns. Proven gold-based metallization system and nitride passivation assure rugged, reliable devices.
36
5-79
5965-4747E
ATF-36163 Absolute Maximum Ratings[1]
Symbol VDS VGS VGD ID PT Pin max TCH TSTG Parameter Drain - Source Voltage Gate - Source Voltage Gate Drain Voltage Drain Current Total Power Dissipation RF Input Power Channel Temperature Storage Temperature Units V V V mA mW dBm C C Absolute Maximum + 3 -3 -3.5 Idss 180 +10 150 -65 to 150 Thermal Resistance: ch-c = 160C/W
Note: 1. Operation of this device above any one of these parameters may cause permanent damage.
ATF-36163 Electrical Specifications
TC = 25C, ZO = 50 , Vds = 1.5 V, Ids = 10 mA, (unless otherwise noted). Symbol NF G gm Idss Vp 10% BVGDO Parameters and Test Conditions Noise Figure[1] f =12.0 GHz Gain at NF[1] f = 12.0 GHz Transconductance VDS = 1.5 V, VGS = 0 V Saturated Drain Current VDS = 1.5 V, VGS = 0 V Pinchoff Voltage VDS = 1.5 V, IDS = 10% of Idss Gate Drain Breakdown Voltage IG = 30 A Units dB dB mS mA V V Min. 9 50 15 -1.0 Typ. 1.2 10 60 25 -0.35 Max. 1.4[1]
40 -0.15 -3.5
Note: 1. Measured in a test circuit tuned for a typical device.
ATF-36163 Typical Parameters
TC = 25C, ZO = 50 , Vds = 2 V, Ids = 15 mA, (unless otherwise noted). Symbol Fmin Ga Gmax P1dB VGS Parameters and Test Conditions Minimum Noise Figure (source = opt) Associated Gain Maximum Available Gain[1] Output Power at 1 dB Gain Compression under the power matched condition Gate to Source Voltage for IDS = 15 mA f = 4 GHz f = 12 GHz f = 4 GHz f = 12 GHz f = 4 GHz f = 12 GHz f = 4 GHz f = 12 GHz VDS = 2.0 V Units dB dB dB dB dB dB dBm dBm V Typ. 0.6 1.0 15.8 9.4 17.2 10.9 5 5 -0.2
Note: 1. Gmax = MAG for K > 1 and Gmax = MSG for K 1, which is shown on the S-parameters tables.
5-80
ATF-36163 Typical Scattering Parameters, Common Source, ZO = 50 , VDS = 1.5 V, ID = 10 mA
Freq. GHz 0.5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 S11 Mag. 0.99 0.98 0.96 0.93 0.87 0.81 0.75 0.67 0.61 0.57 0.57 0.59 0.63 0.67 0.72 0.78 0.82 0.87 0.90 Ang. -11 -22 -42 -61 -83 -106 -131 -158 176 143 108 76 50 26 6 -11 -24 -38 -52 dB 12.85 12.70 12.48 12.37 12.30 12.16 11.94 11.47 11.01 10.47 9.66 8.53 7.39 6.10 4.81 3.49 2.20 0.59 -1.63 S21 Mag. 4.39 4.31 4.21 4.15 4.12 4.06 3.95 3.75 3.55 3.34 3.04 2.67 2.34 2.02 1.74 1.50 1.29 1.07 0.83 Ang. 168 158 138 118 97 76 55 33 12 -10 -32 -54 -74 -93 -111 -128 -146 -164 178 dB -37.72 -31.70 -26.02 -22.73 -20.45 -18.71 -17.52 -16.77 -16.36 -15.97 -15.92 -16.48 -17.14 -18.27 -19.74 -21.41 -23.10 -25.04 -29.12 S12 Mag. 0.01 0.03 0.05 0.07 0.10 0.12 0.13 0.15 0.15 0.16 0.16 0.15 0.14 0.12 0.10 0.09 0.07 0.06 0.04 Ang. 79 71 55 40 23 6 -12 -30 -45 -61 -77 -93 -106 -119 -129 -138 -144 -151 -159
2.4 2.0
S22 Mag. Ang. 0.51 -9 0.50 -18 0.48 -36 0.45 -53 0.40 -71 0.34 -92 0.27 -116 0.18 -144 0.10 174 0.12 93 0.22 53 0.33 28 0.41 9 0.49 -8 0.56 -22 0.63 -33 0.67 -43 0.73 -53 0.78 -65
K -- 0.11 0.17 0.24 0.33 0.43 0.51 0.58 0.69 0.79 0.85 0.91 0.99 1.07 1.18 1.30 1.38 1.44 1.46 1.80
24 20 16 12 8 4
Gmax[1] dB 25.24 22.26 19.28 17.56 16.38 15.43 14.73 14.12 13.69 13.22 12.80 12.50 10.65 9.64 8.99 8.81 8.70 8.79 8.58
Note: 1. Gmax = MAG for K > 1 and Gmax = MSG for K 1.
ATF-36163 Typical Noise Parameters
Common Source, ZO = 50 , VDS = 1.5 V, ID = 10 mA Freq. Fmin Ga opt GHz dB dB Mag. Ang. 2 0.48 18.77 0.78 28 3 0.53 16.75 0.75 41 4 0.57 15.17 0.68 55 5 0.61 14.14 0.60 71 6 0.66 13.23 0.55 88 7 0.71 12.06 0.48 105 8 0.77 11.22 0.38 119 9 0.83 10.50 0.32 138 10 0.89 10.02 0.23 170 11 0.97 9.44 0.18 -141 12 1.05 8.92 0.20 -92 13 1.14 8.45 0.26 -46 14 1.24 8.12 0.36 -16 15 1.37 8.08 0.48 4 16 1.51 8.11 0.59 19 17 1.68 7.97 0.64 34 18 1.89 7.59 0.70 51
1.6
Fmin (dB)
Rn/ZO 0.38 0.32 0.26 0.20 0.15 0.12 0.10 0.07 0.07 0.09 0.13 0.21 0.32 0.44 0.60 0.79 1.15
1.2 0.8 0.4 0 0 2 4 6 8
0 10 12 14 16 18
FREQUENCY (GHz)
Figure 1. ATF-36163 Minimum Noise Figure and Associated Gain vs. Frequency for VDS = 1.5 V, ID = 10 mA.
24 20 16
GAIN (dB)
MSG MAG |S21|2
12 8 4 0 0 2 4 6 8
10 12 14 16 18
FREQUENCY (GHz)
Figure 2. Maximum Available Gain, Maximum Stable Gain & Insertion Power Gain vs. Frequency for VDS = 1.5 V, ID = 10 mA.
5-81
Ga (dB)
ATF-36163 Typical Scattering Parameters, Common Source, ZO = 50 , VDS = 1.5 V, ID = 15 mA
Freq. GHz 0.5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 S11 Mag. 0.99 0.98 0.96 0.92 0.86 0.80 0.74 0.66 0.59 0.56 0.56 0.59 0.63 0.68 0.73 0.79 0.83 0.87 0.91 Ang. -12 -22 -43 -63 -85 -108 -133 -160 173 141 106 74 49 25 5 -12 -25 -38 -53 dB 13.56 13.40 13.16 13.00 12.87 12.68 12.38 11.85 11.33 10.74 9.89 8.74 7.59 6.29 5.01 3.70 2.43 0.84 -1.33 S21 Mag. 4.76 4.68 4.55 4.47 4.40 4.30 4.16 3.91 3.68 3.44 3.12 2.74 2.40 2.06 1.78 1.53 1.32 1.10 0.86 Ang. 168 157 137 116 96 75 53 31 11 -11 -33 -54 -74 -93 -110 -127 -144 -163 180 dB -38.42 -32.40 -26.56 -23.22 -21.01 -19.25 -18.13 -17.39 -16.95 -16.54 -16.42 -16.83 -17.39 -18.42 -19.74 -21.31 -22.85 -24.73 -28.87 S12 Mag. 0.01 0.02 0.05 0.07 0.09 0.11 0.12 0.14 0.14 0.15 0.15 0.14 0.14 0.12 0.10 0.09 0.07 0.06 0.04
2.4 2.0 1.6
Fmin (dB)
Ang. 79 71 56 40 24 7 -11 -28 -42 -58 -73 -88 -102 -115 -124 -133 -139 -148 -155
S22 Mag. Ang. 0.45 -9 0.45 -18 0.43 -36 0.40 -52 0.35 -70 0.28 -92 0.21 -116 0.13 -146 0.06 156 0.12 73 0.23 44 0.34 23 0.42 6 0.50 -10 0.57 -23 0.64 -34 0.68 -44 0.73 -54 0.78 -66
K -- 0.12 0.18 0.26 0.35 0.46 0.55 0.62 0.74 0.84 0.90 0.95 1.03 1.10 1.19 1.29 1.35 1.39 1.39 1.67
24 20 16 12 8 4
Gmax[1] dB 25.82 22.86 19.87 18.13 16.94 15.98 15.25 14.62 14.14 13.63 13.16 11.78 10.62 9.72 9.15 8.99 8.93 9.06 8.92
Note: 1. Gmax = MAG for K > 1 and Gmax = MSG for K 1.
Common Source, ZO = 50 , VDS = 1.5 V, ID = 15 mA Freq. Fmin Ga opt GHz dB dB Mag. Ang. 2 0.49 18.87 0.84 28 3 0.54 17.20 0.74 42 4 0.58 15.75 0.66 57 5 0.63 14.49 0.59 72 6 0.68 13.61 0.54 90 7 0.73 12.36 0.46 106 8 0.79 11.54 0.37 121 9 0.85 10.82 0.30 140 10 0.91 10.32 0.21 174 11 0.99 9.73 0.17 -133 12 1.07 9.22 0.20 -83 13 1.17 8.68 0.26 -40 14 1.27 8.41 0.38 -12 15 1.40 8.36 0.49 7 16 1.54 8.37 0.60 21 17 1.72 8.10 0.62 35 18 1.93 8.00 0.71 52
1.2 0.8 0.4 0 0 2 4 6 8
Rn/ZO 0.38 0.31 0.25 0.19 0.15 0.11 0.09 0.08 0.08 0.10 0.14 0.22 0.34 0.46 0.64 0.85 1.18
0 10 12 14 16 18
FREQUENCY (GHz)
Figure 3. ATF-36163 Minimum Noise Figure and Associated Gain vs. Frequency for VDS = 1.5 V, ID = 15 mA.
24 20 16
GAIN (dB)
MSG MAG |S21|2
12 8 4 0 0 2 4 6 8
10 12 14 16 18
FREQUENCY (GHz)
Figure 4. Maximum Available Gain, Maximum Stable Gain & Insertion Power Gain vs. Frequency for VDS = 1.5 V, ID = 15 mA.
5-82
Ga (dB)
ATF-36163 Typical Noise Parameters
ATF-36163 Typical Scattering Parameters, Common Source, ZO = 50 , VDS = 2.0 V, ID = 10 mA
Freq. GHz 0.5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 S11 Mag. Ang. 0.99 -11 0.99 -22 0.96 -42 0.93 -62 0.87 -83 0.81 -106 0.75 -131 0.67 -157 0.60 176 0.57 144 0.56 109 0.58 77 0.62 50 0.67 26 0.72 6 0.78 -10 0.82 -24 0.87 -37 0.91 -52 dB 13.06 12.90 12.69 12.57 12.51 12.38 12.15 11.70 11.25 10.73 9.95 8.86 7.75 6.49 5.24 3.96 2.68 1.08 -1.16 S21 Mag. 4.50 4.42 4.31 4.25 4.22 4.16 4.05 3.84 3.65 3.44 3.14 2.77 2.44 2.11 1.83 1.58 1.36 1.13 0.88 Ang. 168 158 138 118 97 76 55 33 13 -10 -32 -53 -73 -93 -110 -128 -146 -165 177 dB -37.72 -32.04 -26.38 -22.97 -20.72 -18.94 -17.79 -17.08 -16.65 -16.25 -16.25 -16.77 -17.39 -18.56 -19.91 -21.51 -23.10 -24.88 -28.64 S12 Mag. 0.01 0.03 0.05 0.07 0.09 0.11 0.13 0.14 0.15 0.15 0.15 0.15 0.14 0.12 0.10 0.08 0.07 0.06 0.04 Ang. 79 71 56 40 23 6 -12 -30 -44 -60 -76 -91 -104 -117 -126 -134 -139 -147 -153 S22 Mag. Ang. 0.55 -9 0.55 -18 0.53 -35 0.50 -52 0.44 -70 0.38 -90 0.31 -112 0.21 -137 0.13 -168 0.10 115 0.18 61 0.29 32 0.37 12 0.46 -5 0.53 -19 0.60 -30 0.65 -40 0.71 -50 0.78 -63 K - 0.11 0.16 0.24 0.32 0.42 0.51 0.58 0.69 0.79 0.85 0.91 1.00 1.08 1.19 1.31 1.38 1.42 1.38 1.63 Gmax[1] dB 25.46 22.46 19.50 17.77 16.61 15.67 14.98 14.38 13.96 13.50 13.10 12.52 10.82 9.85 9.24 9.07 9.03 9.28 9.06
Note: 1. Gmax = MAG for K > 1 and Gmax = MSG for K 1.
2.4 2.0
24 20 16 12 8 4 0 10 12 14 16 18
Ga (dB)
ATF-36163 Typical Noise Parameters
Common Source, ZO = 50 , VDS = 2.0 V, ID = 10 mA Freq. Fmin Ga opt GHz dB dB Mag. Ang. 2 0.46 18.60 0.84 28 3 0.50 16.75 0.76 41 4 0.54 15.55 0.67 56 5 0.59 14.20 0.61 70 6 0.63 13.37 0.55 88 7 0.68 12.12 0.49 103 8 0.74 11.35 0.39 118 9 0.80 10.59 0.33 135 10 0.86 10.11 0.23 165 11 0.94 9.57 0.17 -145 12 1.02 9.08 0.18 -93 13 1.11 8.59 0.24 -47 14 1.22 8.30 0.34 -16 15 1.35 8.29 0.47 5 16 1.51 8.32 0.58 19 17 1.69 8.07 0.60 34 18 1.92 7.68 0.66 50
1.6
Rn/ZO 0.38 0.31 0.25 0.20 0.15 0.12 0.10 0.07 0.07 0.09 0.12 0.19 0.30 0.42 0.57 0.76 1.10
Fmin (dB)
1.2 0.8 0.4 0 0 2 4 6 8
FREQUENCY (GHz)
Figure 5. ATF-36163 Minimum Noise Figure and Associated Gain vs. Frequency for VDS = 2.0 V, ID = 10 mA.
24 20 16
GAIN (dB)
MSG MAG |S21|2
12 8 4 0 0 2 4 6 8
10 12 14 16 18
FREQUENCY (GHz)
Figure 6. Maximum Available Gain, Maximum Stable Gain & Insertion Power Gain vs. Frequency for VDS = 2.0 V, ID = 10 mA.
5-83
ATF-36163 Typical Scattering Parameters, Common Source, ZO = 50 , VDS = 2 V, ID = 15 mA
Freq. GHz 0.5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 S11 Mag. Ang. 0.99 -12 0.98 -22 0.96 -43 0.92 -63 0.86 -85 0.79 -108 0.73 -133 0.65 -160 0.59 173 0.55 141 0.56 107 0.58 75 0.63 49 0.68 26 0.73 6 0.78 -11 0.83 -24 0.88 -38 0.91 -52 dB 13.85 13.70 13.45 13.29 13.16 12.96 12.67 12.13 11.63 11.06 10.23 9.11 8.00 6.75 5.49 4.22 2.99 1.42 -0.79 S21 Mag. 4.93 4.84 4.70 4.62 4.55 4.45 4.30 4.04 3.81 3.57 3.25 2.86 2.51 2.17 1.88 1.63 1.41 1.18 0.91 Ang. 168 157 137 117 96 75 53 32 11 -11 -32 -53 -73 -92 -110 -127 -145 -164 178 dB -38.42 -32.40 -26.74 -23.48 -21.31 -19.58 -18.42 -17.72 -17.27 -16.83 -16.77 -17.14 -17.72 -18.71 -20.00 -21.41 -22.73 -24.44 -27.96 S12 Mag. 0.01 0.02 0.05 0.07 0.09 0.11 0.12 0.13 0.14 0.14 0.15 0.14 0.13 0.12 0.10 0.09 0.07 0.06 0.04 Ang. 79 71 56 40 24 7 -10 -28 -42 -57 -72 -87 -99 -112 -121 -129 -135 -143 -149
2.4 2.0
S22 Mag. Ang. 0.51 -9 0.50 -18 0.48 -35 0.45 -52 0.40 -69 0.33 -90 0.26 -112 0.17 -136 0.09 -171 0.09 93 0.19 51 0.30 27 0.38 9 0.47 -7 0.54 -20 0.61 -31 0.66 -41 0.72 -51 0.78 -63
K - 0.12 0.17 0.26 0.35 0.46 0.55 0.62 0.75 0.84 0.90 0.96 1.04 1.11 1.20 1.30 1.35 1.36 1.31 1.50
Gmax[1] dB 26.10 23.11 20.13 18.40 17.22 16.26 15.54 14.93 14.46 13.95 13.50 11.93 10.85 10.00 9.45 9.30 9.31 9.56 9.44
24 20 16 12 8 4
Ga (dB)
Note: 1. Gmax = MAG for K > 1 and Gmax = MSG for K 1.
ATF-36163 Typical Noise Parameters
Common Source, ZO = 50 , VDS = 2.0 V, ID = 15 mA Freq. Fmin Ga opt GHz dB dB Mag. Ang. 2 0.48 18.97 0.83 28 3 0.52 17.27 0.74 41 4 0.56 15.75 0.67 56 5 0.61 14.54 0.60 71 6 0.65 13.68 0.55 89 7 0.70 12.47 0.46 104 8 0.76 11.66 0.37 118 9 0.82 10.94 0.31 136 10 0.88 10.44 0.21 168 11 0.95 9.88 0.15 -137 12 1.03 9.38 0.18 -85 13 1.12 8.90 0.25 -41 14 1.23 8.63 0.36 -13 15 1.35 8.59 0.48 7 16 1.49 8.63 0.58 20 17 1.65 8.68 0.65 34 18 1.86 8.32 0.70 51
1.6
Rn/ZO 0.37 0.31 0.25 0.19 0.15 0.11 0.09 0.08 0.07 0.09 0.13 0.21 0.32 0.44 0.60 0.79 1.10
Fmin (dB)
1.2 0.8 0.4 0 0 2 4 6 8
0 10 12 14 16 18
FREQUENCY (GHz)
Figure 7. ATF-36163 Minimum Noise Figure and Associated Gain vs. Frequency for VDS = 2 V, ID = 15 mA.
24 20 16
GAIN (dB)
MSG
12 |S21|2 8 4 0 0 2 4 6 8
MAG
10 12 14 16 18
FREQUENCY (GHz)
Figure 8. Maximum Available Gain, Maximum Stable Gain & Insertion Power Gain vs. Frequency for VDS = 2 V, ID = 15 mA.
5-84
ATF-36163 Typical "Off" Scattering Parameters, Common Source, ZO = 50 ,VDS = 0 V,
V = 0V GS Freq. GHz 0.5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Mag. 0.998 0.993 0.99 0.98 0.96 0.94 0.92 0.89 0.86 0.84 0.83 0.83 0.85 0.86 0.87 0.90 0.93 0.93 0.93 S11 Ang. -10 -20 -37 -55 -74 -95 -118 -142 -168 162 128 94 64 36 12 -8 -24 -39 -53 dB -46.02 -39.17 -32.77 -28.64 -25.35 -22.62 -20.45 -18.79 -17.02 -15.70 -14.85 -14.66 -14.85 -15.76 -17.14 -18.71 -20.45 -23.35 -27.96 S21 Mag. 0.01 0.01 0.02 0.04 0.05 0.07 0.10 0.12 0.14 0.16 0.18 0.19 0.18 0.16 0.14 0.12 0.10 0.07 0.04 Ang. 80 81 75 67 56 42 27 11 -6 -24 -44 -64 -83 -101 -116 -129 -140 -154 -161 dB -46.02 -39.17 -32.77 -28.64 -25.19 -22.50 -20.45 -18.71 -17.02 -15.70 -14.85 -14.66 -14.85 -15.76 -17.08 -18.71 -20.45 -23.10 -28.18 S12 Mag. 0.01 0.01 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.19 0.18 0.16 0.14 0.12 0.10 0.07 0.04 S22 Ang. 86 83 76 68 57 42 27 11 -5 -24 -44 -64 -83 -101 -115 -129 -140 -152 -161 Mag. 0.703 0.701 0.70 0.71 0.73 0.74 0.75 0.77 0.78 0.81 0.83 0.84 0.85 0.87 0.89 0.89 0.90 0.90 0.90 Ang. 170 160 139 119 99 81 63 46 30 16 3 -10 -22 -34 -44 -53 -62 -71 -81
ATF-36163 Typical "Off" Scattering Parameters, Common Source, ZO = 50 , VDS = 2.0 V,
VGS = -1.5V Freq. GHz 0.5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 S11 Mag. 0.97 0.98 0.99 0.98 0.97 0.96 0.94 0.92 0.89 0.85 0.79 0.74 0.72 0.71 0.75 0.82 0.89 0.91 0.92 Ang. -8 -16 -30 -43 -57 -72 -87 -103 -119 -136 -158 177 149 114 74 35 5 -21 -42 dB -34.89 -28.87 -22.85 -19.33 -16.71 -14.42 -12.62 -10.90 -9.60 -8.09 -6.73 -5.85 -5.71 -6.54 -8.95 -12.80 -18.49 -24.88 -27.54 S21 Mag. 0.02 0.04 0.07 0.11 0.15 0.19 0.23 0.29 0.33 0.39 0.46 0.51 0.52 0.47 0.36 0.23 0.12 0.06 0.04 Ang. 82 74 59 44 29 14 -2 -20 -37 -56 -79 -106 -136 -170 155 123 94 79 70 dB -34.89 -28.87 -22.97 -19.33 -16.71 -14.47 -12.65 -10.96 -9.63 -8.09 -6.73 -5.87 -5.71 -6.52 -8.92 -12.69 -18.20 -24.44 -27.96 S12 Mag. 0.02 0.04 0.07 0.11 0.15 0.19 0.23 0.28 0.33 0.39 0.46 0.51 0.52 0.47 0.36 0.23 0.12 0.06 0.04 S22 Ang. 81 73 59 44 30 14 -2 -20 -37 -56 -79 -106 -136 -170 156 123 95 84 69 Mag. 0.999 0.998 0.995 0.98 0.97 0.95 0.94 0.92 0.89 0.83 0.79 0.75 0.73 0.74 0.79 0.85 0.90 0.91 0.90 Ang. -7 -14 -29 -43 -57 -74 -91 -107 -125 -148 -174 156 123 86 50 18 -8 -30 -50
5-85
1.9 dB 1.4 dB 1.3 dB 1.2 dB 1.1 dB
9.5 dB 10.5 dB
11.5 dB
Figure 9. Smith Chart with Noise Figure and Available Gain Circles at 12 GHz, VDS = 1.5 V, ID = 10 mA.
Phase Reference Planes The positions of the reference planes used to measure SParameters and to specify opt for the Noise Parameters are shown in Figure 10. As seen in the illustration, the reference planes are located at the extremities of the package leads.
REFERENCE PLANES
SOT-363 PCB Layout A PCB pad layout for the miniature SOT-363 (SC-70) package used by the ATF-36163 is shown in Figure 11 (dimensions are in inches). This layout provides ample allowance for package placement by automated assembly equipment. The layout is shown with a nominal SOT-363 package footprint superimposed on the PCB pads.
0.026
TEST CIRCUIT
0.075
Figure 10. Reference Planes.
0.035
0.016
Figure 11. PCB Pad Layout (Dimensions in Inches).
5-86
Package Dimensions
Outline 63 (SOT-363/SC-70)
1.30 (0.051) REF.
2.20 (0.087) 2.00 (0.079)
1.35 (0.053) 1.15 (0.045)
0.650 BSC (0.025) 2.20 (0.087) 1.80 (0.071) 0.10 (0.004) 0.00 (0.00) 0.425 (0.017) TYP.
0.30 REF.
1.00 (0.039) 0.80 (0.031) 0.25 (0.010) 0.15 (0.006)
10
0.30 (0.012) 0.10 (0.004)
0.20 (0.008) 0.10 (0.004)
DIMENSIONS ARE IN MILLIMETERS (INCHES)
Part Number Ordering Information
Part Number ATF-36163-TR1 ATF-36163-BLK No. of Devices 3000 100 Container 7" Reel antistatic bag
5-87
Device Orientation
REEL
TOP VIEW 4 mm END VIEW
8 mm
CARRIER TAPE USER FEED DIRECTION COVER TAPE
36
36
36
36
Tape Dimensions and Product Orientation
For Outline 63
P P0 D P2
E
F W C
D1 t1 (CARRIER TAPE THICKNESS) Tt (COVER TAPE THICKNESS)
8 MAX.
K0
5 MAX.
A0
B0
DESCRIPTION CAVITY LENGTH WIDTH DEPTH PITCH BOTTOM HOLE DIAMETER DIAMETER PITCH POSITION WIDTH THICKNESS WIDTH TAPE THICKNESS CAVITY TO PERFORATION (WIDTH DIRECTION) CAVITY TO PERFORATION (LENGTH DIRECTION)
SYMBOL A0 B0 K0 P D1 D P0 E W t1 C Tt F P2
SIZE (mm) 2.24 0.10 2.34 0.10 1.22 0.10 4.00 0.10 1.00 + 0.25 1.55 0.05 4.00 0.10 1.75 0.10 8.00 0.30 0.255 0.013 5.4 0.10 0.062 0.001 3.50 0.05 2.00 0.05
SIZE (INCHES) 0.088 0.004 0.092 0.004 0.048 0.004 0.157 0.004 0.039 + 0.010 0.061 0.002 0.157 0.004 0.069 0.004 0.315 0.012 0.010 0.0005 0.205 0.004 0.0025 0.00004 0.138 0.002 0.079 0.002
PERFORATION
CARRIER TAPE COVER TAPE DISTANCE
5-88

▲Up To Search▲

Price & Availability of ATF-36163

	To Download ATF-36163 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .